02 Automatic dosing systems &
Salt electrolysis

The trend of the salt electrolysis also continues in the season 2021. The production of chlorine, coupled with exact dosage, is one of the key products for clean and clear water in the pool. We have environmentally friendly and modern devices for disinfecting and controlled dosing systems. These include the easy-to-use measuring and control units with colored and comfortable touch displays, salt electrolysis / hydrolysis and oxygen Disinfection systems, as well as all expansion modules. Complete and compact systems for pool control and water treatment are also listed in this chapter.

Automatic dosing systems for your pool

Are you interested?

Then download the current catalog section here.

MIDA.Sin Pro

This liquid chlorine dosing system regulates the pH as well as the chlorine value.
The regulation of the chlorine occurs via the redox potential (mV) or the free chlorine
content (mg / l).
In addition, algicide and a special flocculant MIDA.Sin Floc + for crystal clear water. The system can be switched between redox and
free chlorine at any time and continue to dose even if the probe fails (disinfection ml / m³).

MIDA.Sin Pro Oxygen

The chlorine-free water treatment with pH and oxygen, which in connection with algicide and a special flocculant MIDA.Sin Floc + ensures crystal-clear and skin-friendly water.
Particularly suitable for metal and stainless steel components in the pool when liquid chlorine is not required.

MIDA.Sin Salt

Advanced salt electrolysis system (2-4 g / l salt content) with pH control, as well Chlorine production, which is regulated by the free chlorine content (mg / l).
In addition, algae can be added to support disinfection and prevent algae formation. The system also shows the salinity permanently
(kg / m³), not only when this is too low. The service life of the self-cleaning electrolysis cell is approx. 8,000 operating hours ** (vertical or horizontal installation).
The transformer is cooled by the measuring water.

MIDA.Sin

Compact measuring, control and dosing system for liquid chlorine with control of the pH value and the chlorine value with integrated electrode holders and dosing pumps.
The chlorine value is regulated via the redox potential (mV) or the free chlorine content (mg / l). The system can be switched between redox and free chlorine at any time and continue to dose even if the probe fails (disinfection ml / m³).
These systems do not include a pool management system.

pH dosing system

Compact unit for automatic measurement and control of the
pH value according to the set target value with LED display,
glass probe, integrated dosing pump 60 ml / min. (3.6 l / h),
as well as 10 m measuring and dosing line ¼“, measuring water
shut-off cocks and injection valve, easy installation and simple
operation via 4 buttons, for wall mounting,
including safety shutdown, for pools from 1-250 m³ and
Whirlpools, 230 V / 50Hz, protection class IP30

MIDA.Oxi

MIDA.Oxi is a water treatment system AND a controller for swimming pools.
This water treatment combines electrolysis of low salinity with hydrolysis. With the electrolysis of low salinity we produce liquid chlorine from water which is very slightly salted (from 1.5 g of salt per liter).

Controls all components!

Optional accessoires and spare parts

Long Life probes, electrolyte, displays, adhesive plugs, pressure water level probe and many more

UV-C Tech disinfection systems

Already in 1878 it was discovered that sunlight has an antibacterial effect.

A popular accessory of swimming pool water treatment is therefore the UV-C radiation without influencing the water quality (pH, oxygen content). The addition of water care products can thus be considerably reduced.

Pool salt, chemistry and buffer solutions

Corresponding to quality standard EN 16401 and Biocidal Products Regulation (BPR) 528/2012 EU.